FAQ:
1) Where can learn more about batteries? http://j35.us/DIYlithiumBatteryBook
2) Where can I buy Lithium Batteries https://j35.us/Lithium-July
3) Where Can I buy Solar Panels? Flexible - http://j35.us/136wFlexSolarPanl
Glass - http://j35.us/100w-100-solar
DIY - http://j35.us/DIY-Solar-cells
4) Where can I buy a Battery Management System? https://kit.com/jehu/battery-management-system
5) What motor does your VW bus use? http://j35.us/HPEVS-AC51-Motor
6) What parts do you use on your Samba? https://j35.us/eSambaProj
7) What is the best fuse wire? I only use 1/8w resistor legs http://j35.us/ResistorLegs
8) Why not use Supercapacitors?
A. Batteries work better at this time, caps are rare and expensive devices that are very good at doing things not needed for storage systems typically.
Product links
$1 Dollar LG 18650 eBay cells - http://j35.us/one-dollar-cells
Wire channel for Paralleling device - http://j35.us/WireChannel
Brass rods to connect pack in Parallel - http://j35.us/Brass-Rods
Male XT60 connectors - http://j35.us/MaleXT60
XT90 Cennector kits - http://j35.us/XT90connetors
1000Watt Mppt Solar grid tie inverter - http://j35.us/1kWGridTie
No solder No welding battery assembly system - https://vruzend.com
DIY Lithium Battery Book http://j35.us/DIYlithiumBatteryBook
Disclosure: When you click on links to various merchants on this Videos and make a purchase, this can result in the earning of a commission. Affiliate programs and affiliations include, eBay Partner Network, and Amazon..
Music:
Danijel Zambo - Dance - https://youtu.be/OdCTyGMntwY
Knapsack - Patches - https://youtu.be/MRVm9L-b9rA
Atlas Elision - https://youtu.be/A4BofJR2H6Y
My video gear - https://kit.com/jehu/vlogging-essentials
Follow me on Instagram http://j35.us/insta-jag35
Follow me on Twitter http://j35.us/twitter-jag35
Follow me on Facebook http://j35.us/Facebook-JehuGarcia
If you would like support my Projects
Buy some of My Merch http://j35.us/Jehus-MERCH-Store
you can donate: http://j35.us/helpwithcash
or you can become our patron https://www.patreon.com/jehu
sponsors
http://j35.us/jag35-2016
http://gabvwkey.com
http://j35.us/indiespot-2016
http://evwest.com
http://www.rode.com/products

14 thoughts on “Simple diy powerwall using $1 lg 18650 ebay cells”
  1. Avataaar/Circle Created with python_avatars Beast Mode says:

    Should do the cells one at a time and verify that they make contact then tie them all together

  2. Avataaar/Circle Created with python_avatars paperjawa says:

    Cut a board to fit the top and or bottom. When you clamp it will distribute the pressure across the lot of them. Shouldn’t have to do that with that system though, ya know? Should be good out of the box.

  3. Avataaar/Circle Created with python_avatars MarkTheUnitedStatesCitezen In Jesus Name Acts 2:38 says:

    How long can I use this Inverter ?

  4. Avataaar/Circle Created with python_avatars Tom says:

    geezus good luck balancing them 😀

  5. Avataaar/Circle Created with python_avatars FENNEX fOX says:

    do you have to build a block ? why not just two rows ?

  6. Avataaar/Circle Created with python_avatars Matt Thomas says:

    I don't want to sit here and waste my time watching someone explain the shit when it would be much more efficient to just write what you've done and let me read it.

  7. Avataaar/Circle Created with python_avatars Matt Thomas says:

    These kind of videos are useless. Never include diagrams or schematics.. or anything useful. Yall just want to be seen. It's a shame my Google results are so littered with this useless crap

  8. Avataaar/Circle Created with python_avatars Timothy Jalbert says:

    Your battery link in eBay
    doesn't work

  9. Avataaar/Circle Created with python_avatars Robert Dillon says:

    Is brass only 1/4 as conductive as copper ? I think so…

  10. Avataaar/Circle Created with python_avatars PCB LAND says:

    Amazing my friend ♥♥♥♥♥

    Nice to meet you ♥♥♥♥♥

    Best wishes for you ♥♥♥♥♥

    Keep it up ………… ♥♥♥♥♥

  11. Avataaar/Circle Created with python_avatars Eric Blenner-Hassett says:

    Awesome idea, poorly implemented…. taking a drill to a ' finished ' product is always a trade off between buy cheap vs buy quality.

  12. Avataaar/Circle Created with python_avatars Richard Eun says:

    Do you own a reliable spot welder? What brand or kind of spot welder do you recommend for beginners for a nickel strip 0.15mm thick?

  13. Avataaar/Circle Created with python_avatars Michael Stirling says:

    what the fuck is a powerwall

  14. Avataaar/Circle Created with python_avatars Year of the rooster says:

    That really hits my sweet spot

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.