This week I finished soldering my first 18650 module, plus I assemble another 10 modules using the china Clips.
Music by :
http://j35.us/amazon-fjk-waiting
http://j35.us/amazon-andy-immerman-forecast
http://j35.us/youth-lagoon-cannons
http://j35.us/zimmer-moonrise
http://j35.us/Bajka-The-Beavers-Lesson
http://j35.us/Caves-Lost4Ever
http://j35.us/Montevideo-Castles
http://j35.us/Vsauce-music
Here’s a list of all the gear I use to shoot my vlog.
Panasonic Lumix GH4 - http://j35.us/amazon-panasonic-gh4
Panasonic 7-14mm f4.0 Lens - http://j35.us/amazon-panasonic-7-14
Voigtlander 10.5mm f.95 Lens - http://j35.us/amazon-voigtlander-10-5mm
Lexar 64GB 1000x SD Cards - http://j35.us/amazon-lexar-sdcard-64gb-1000x
Rode Microphones - http://j35.us/amazon-rode-videomic-pro
Joby Gorillapod - http://j35.us/amazon-joby-gorillapod
GoPro4 Silver - http://j35.us/amazon-gopro-h4-silver
SJCam400 - http://j35.us/amazon-sjcam-sj4000
Zoom EXH-6 - http://j35.us/Zoom-EXH-6
VidiU Pro - http://j35.us/amazon-teradek-vidiupro
Gear I’m considering purchasing:
http://j35.us/DJI-Phanthom3-Pro
http://j35.us/Amazon-DJI-Osmo-4K-handheld
http://j35.us/amazon-sony-rx100m3
http://j35.us/amazon-sony-a7sii
Instagram: http://j35.us/insta-jag35
Twitter: http://j35.us/twitter-jag35
Facebook: http://facebook.com/jag35media
Beme: http://j35.us/beme-jag35
If you would like support our project by donating, you can use this link:
http://j35.us/helpwithcash or by using
patreon https://www.patreon.com/jehu
Also please support our sponsors
http://j35.us/jag35-2016
http://gabvwkey.com
http://j35.us/indiespot-2016
http://evwest.com
http://www.isee360.com
http://www.rode.com/products
Music by :
http://j35.us/amazon-fjk-waiting
http://j35.us/amazon-andy-immerman-forecast
http://j35.us/youth-lagoon-cannons
http://j35.us/zimmer-moonrise
http://j35.us/Bajka-The-Beavers-Lesson
http://j35.us/Caves-Lost4Ever
http://j35.us/Montevideo-Castles
http://j35.us/Vsauce-music
Here’s a list of all the gear I use to shoot my vlog.
Panasonic Lumix GH4 - http://j35.us/amazon-panasonic-gh4
Panasonic 7-14mm f4.0 Lens - http://j35.us/amazon-panasonic-7-14
Voigtlander 10.5mm f.95 Lens - http://j35.us/amazon-voigtlander-10-5mm
Lexar 64GB 1000x SD Cards - http://j35.us/amazon-lexar-sdcard-64gb-1000x
Rode Microphones - http://j35.us/amazon-rode-videomic-pro
Joby Gorillapod - http://j35.us/amazon-joby-gorillapod
GoPro4 Silver - http://j35.us/amazon-gopro-h4-silver
SJCam400 - http://j35.us/amazon-sjcam-sj4000
Zoom EXH-6 - http://j35.us/Zoom-EXH-6
VidiU Pro - http://j35.us/amazon-teradek-vidiupro
Gear I’m considering purchasing:
http://j35.us/DJI-Phanthom3-Pro
http://j35.us/Amazon-DJI-Osmo-4K-handheld
http://j35.us/amazon-sony-rx100m3
http://j35.us/amazon-sony-a7sii
Instagram: http://j35.us/insta-jag35
Twitter: http://j35.us/twitter-jag35
Facebook: http://facebook.com/jag35media
Beme: http://j35.us/beme-jag35
If you would like support our project by donating, you can use this link:
http://j35.us/helpwithcash or by using
patreon https://www.patreon.com/jehu
Also please support our sponsors
http://j35.us/jag35-2016
http://gabvwkey.com
http://j35.us/indiespot-2016
http://evwest.com
http://www.isee360.com
http://www.rode.com/products
What kind of solder do you recommend using for high current applications? Numbers I’m thinking of are between 169-180 amps at 80-100v.
Where did you buy your clips from?
Are you really only using 3.7V battery packs? It is extremely inefficient to run at such a low voltage because you get far higher current-squared losses. The Tesla's use a 375V battery for very good reasons. Have you spoken to any electrical engineers about the way you are making the battery?
What is the cost of a finished batter pack??
What is the width and thickness of the cooper strips that you have used in your modules?
Is it 0.016" Thick, 1/4" Wide x 12" Long?
I used 18650 for my Goped ESR 750H…..34V and 37.5 amps with total 145 Panasonic cells.
Do you have a blog with specs on how to assembly these 16850 packs? What type of BMS controller are you going to use to charge these packs and monitor the temps?
great job, but where did you get all of the small chargers and the clips? thanks
Nice work on the Batteries. Ordered up tonight a Baseplate and sidekick pro. Nice products. Lookin to get a video up of my charging setup. You'll like it.
Love the battery hounds!
Why not remove the orange rubber sheath? They add weight & prevent heat dissipation. How will you vent or cool the batteries?
Loved the update… Batteries are looking good…
Brilliant inspiring stuff, greetings from the uk
Great series. I like the camera work and overhead time lapses. You make difficult work look pretty easy. I've got a '77 Westy and am considering electrifying it in the long run. We're on our second Prius and now have a Leaf, so I;'m interested in the home-grown BEV success rate.
keep going man! from Italy… 😉
get yourself a 3D printer and make your own battery trays