Music:
Here’s a list of all the gear I use to shoot my vlog.
Panasonic Lumix GH4 - http://j35.us/amazon-panasonic-gh4
Panasonic 7-14mm f4.0 Lens - http://j35.us/amazon-panasonic-7-14
Voigtlander 10.5mm f.95 Lens - http://j35.us/amazon-voigtlander-10-5mm
Lexar 64GB 1000x SD Cards - http://j35.us/amazon-lexar-sdcard-64gb-1000x
Rode Microphones - http://j35.us/amazon-rode-videomic-pro
BendyPOD Tripod - http://j35.us/BendyPOD
VidiU Pro - http://j35.us/amazon-teradek-vidiupro
DJI Mavic Pro DRONE http://j35.us/2ddsy6k
DJI OSMO Mobile http://j35.us/djiOSMOmobile
GoPRO 5 http://j35.us/GoProHero5black
THULE Backpack - http://j35.us/Thule-Backpack
Macbook Pro - http://j35.us/MacBookPro13inch
Gear I’m considering purchasing:
http://j35.us/amazon-sony-rx100m3
http://j35.us/amazon-sony-a7sii
http://j35.us/Samsung-S7Edge
http://j35.us/Olympus-7-14-28
http://j35.us/1TGPRRo
Follow me on Instagram http://j35.us/insta-jag35
Follow me on Beme http://j35.us/beme-jag35
Follow me on Twitter http://j35.us/twitter-jag35
Follow me on Facebook http://j35.us/Facebook-JehuGarcia
If you would like support our project and help me make videos,
you can donate: http://j35.us/helpwithcash
or you can become our patron https://www.patreon.com/jehu
Also please support our sponsors
http://j35.us/jag35-2016
http://gabvwkey.com
http://j35.us/indiespot-2016
http://evwest.com
http://www.isee360.com
http://www.rode.com/products

12 thoughts on “Very important to bottom balance lithium battery cells – vlog #216”
  1. Avataaar/Circle Created with python_avatars Christopher Beasley says:

    so if you bottom ballance LiPO4 cells, you can run without a bms?

  2. Avataaar/Circle Created with python_avatars Gabriel Martinez says:

    Doesn't the bms bottom balance and top balance they battery? I dont think Tesla connects all the batteries they use in parallel top balance then drain then bottom balance then put them together then use a bms they probably just build the battery charge it test the resting voltages place the closest ones together in groups +-.01v apart maybe less then build their batteries packs.

  3. Avataaar/Circle Created with python_avatars GM Moreno says:

    I have a 32650 12V pack. What is the safest voltage to stop when discharging… and can i set that minimum voltage to a "Low Voltage Buzzer Alarm"?

  4. Avataaar/Circle Created with python_avatars Vladimir Hristov says:

    Thank you 🙏 ✔️

  5. Avataaar/Circle Created with python_avatars Educate or Stagnate says:

    As educational videos goes this video is pretty much useless useless. The title has nothing to do with what's on the video.

  6. Avataaar/Circle Created with python_avatars NoRightsLeft says:

    I'm totally confused
    Bottom balance is only half of the story (a dangerous half)
    They have to be in balance at the top,,, Wait what? So what to do if they are not equal at the top "of the charge curve"? (is the top of the charge curve 100%?)

  7. Avataaar/Circle Created with python_avatars BRS_Maulwurf says:

    I´ve acess to drive a Pinzgauer at home… they are soo awesome vehicles. i woner how a electric version would handle 😮

  8. Avataaar/Circle Created with python_avatars Raymond Warren says:

    Notice how the battery cells don’t seem to have any balance wires. No BMS, as far as I can see. So now I question the benefit of a BMS…. 🤔

  9. Avataaar/Circle Created with python_avatars Digital Revolution says:

    Parts for Pinzgauer i can find…

  10. Avataaar/Circle Created with python_avatars PHYSICS SHEPHRD FOR JEE & NEET says:

    Y u dont use gare box in ev ?

  11. Avataaar/Circle Created with python_avatars Google+ SUCKS BALLS - the worst forced social network says:

    I'm using a bidirectional flywheel balancer. Do I need to bottom balance as well? *wink wink*. Just because you put same voltages on discharge doesn't mean they'll all top out at same time.. and vice versa. If you have a cell that has less capacity than others in pack, you can't do anything about it with balancing (it will always top out first or last, same with discharge), except if you install a complete cutoff per-cell voltage or install bidirectional balancer.

  12. Avataaar/Circle Created with python_avatars Ken Bell says:

    Balancing should be active through the charge cycle. Active balance through discharge can be done with isolated charge pumps on each cell activated by bulk current differential.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.