Buy - https://jag35.com/products/can-controller-for-lgmh1-18650-lithium-scooter-battery-pack
Code your own - https://github.com/alex3dbros/LGH1ScooterPackPower
FAQ:
1) Where can learn more about batteries? http://j35.us/DIYlithiumBatteryBook
2) Where can I buy Lithium Batteries https://kit.co/jehu/lithium-battery-cell-sources
4) Where Can I buy Solar Panels? Flexible - http://j35.us/136wFlexSolarPanl
Glass - http://j35.us/100w-100-solar
DIY - http://j35.us/DIY-Solar-cells
5) Where can I buy a Battery Management System? https://kit.co/jehu/battery-management-system
6) What parts do you use on your Samba? https://kit.co/jehu/the-electric-samba-project-components
7) Why not use Supercapacitors?
A. Batteries work better at this time, caps are rare and expensive devices that are very good at doing things not needed for storage systems typically.
Disclosure: When you click on links to various merchants on this Videos and make a purchase, this can result in the earning of a commission. Affiliate programs and affiliations include, eBay Partner Network, and Amazon..
Advertise on my channel - http://archimedes.agency/ #influencers
My video gear - https://kit.co/jehu/vlogging-essentials
My T-shirts - https://kit.co/jehu/jehu-s-merchandizing
Follow me on Instagram http://j35.us/insta-jag35
Follow me on Twitter http://j35.us/twitter-jag35
Join our Facebook Group https://www.facebook.com/groups/jehusDiYPowerwalls/
If you would like support my Projects you can:
Buy a Tesla using my referral code https://ts.la/christal20797
donate: http://j35.us/helpwithcash
Donate BitCoin - 1PjhLF2vPueywwaoUMetZCLbC6rQiniyj7
or you can become our patron https://www.patreon.com/jehu

14 thoughts on “Waking up scooter lithium batteries w smt32 can controller”
  1. Avataaar/Circle Created with python_avatars Liman Berisha says:

    Hi
    I tried to connect escooter battery with only + and – wires to ebike controller with positive and negative wires plus three other wires. On the controller is written CAN controller.
    The problem is that display goes on directly by connecting + and – wires. Also display shows error code.
    Can I fix it anyhow?
    Thanks.

  2. Avataaar/Circle Created with python_avatars FPV RC says:

    do you know if this will work with a OKAI ES400 battery

  3. Avataaar/Circle Created with python_avatars ghz24 says:

    So you need the microcontroller to operate the battery not just wake it?

  4. Avataaar/Circle Created with python_avatars Mr Money says:

    The can controller is sold out , when will they be available to be sent to Australia??

  5. Avataaar/Circle Created with python_avatars Richard Linked says:

    Been waiting a while for a CAN controller for my scooter pack. Any ideas when you will have them in stock again?

  6. Avataaar/Circle Created with python_avatars jc jc says:

    hi can you say me if i buy one board ,i must programming or i can use directly ?

  7. Avataaar/Circle Created with python_avatars Kevin Eichhorst says:

    Been waiting a while for a CAN controller for my scooter pack. Any ideas when you will have them in stock again? Thanks

  8. Avataaar/Circle Created with python_avatars jc jc says:

    You are the best

  9. Avataaar/Circle Created with python_avatars Seven 77 says:

    Does anyone know how to reset the scooterpack BMS on overload or over voltage cutoff?

  10. Avataaar/Circle Created with python_avatars ROQM says:

    Hi did you make that xt60 buss bar?

  11. Avataaar/Circle Created with python_avatars Smashing Gaming says:

    I want to make a 40v battery pack for a mower, but want to use the same housing and connecter. Can't seem to find a 40v bms

  12. Avataaar/Circle Created with python_avatars jazzboxuz says:

    when will CAN controller boards be back in stock at jag35?

  13. Avataaar/Circle Created with python_avatars William K says:

    I connected the CAN controller to my battery pack and there is a voltage on the output terminals. However, when I connect the terminals to a load, the BMS shuts down. Anyone else experiencing this?

  14. Avataaar/Circle Created with python_avatars Marek Kučer says:

    Hello, I could ask what voltage the 18650 should be reused, I have almost all below 4.15v, but it should be 4.20v is it a problem?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.