8pin cable https://s.click.aliexpress.com/e/_A62OFx
BATTGo - https://s.click.aliexpress.com/e/_A78Fm9
Loaded PCB Modules - https://jag35.com/collections/lithium-batteries/products/7s-24v-battery-modules-new-ncr18650b-cells
FAQ:
1) Where can learn more about batteries? http://j35.us/DIYlithiumBatteryBook
2) Where can I buy Lithium Batterieshttps://jag35.com/collections/lithium-batteries?
4) Where Can I buy Solar Panels? Flexible - http://j35.us/136wFlexSolarPanl
Glass - http://j35.us/100w-100-solar
5) Where can I buy a Battery Management System? https://kit.co/jehu/battery-management-system
6) What parts do you use on your Samba? https://kit.co/jehu/the-electric-samba-project-components
7) Why not use Supercapacitors?
A. Batteries work better at this time, caps are rare and expensive devices that are very good at doing things not needed for storage systems typically.
Disclosure: When you click on links to various merchants on this Videos and make a purchase, this can result in the earning of a commission. Affiliate programs and affiliations include, eBay Partner Network, and Amazon..
Advertise on my channel - http://archimedes.agency/ #influencers
My video gear - https://kit.co/jehu/vlogging-essentials
My T-shirts - https://kit.co/jehu/jehu-s-merchandizing
Follow me on Instagram http://j35.us/insta-jag35
Follow me on Twitter http://j35.us/twitter-jag35
Join our Facebook Group https://www.facebook.com/groups/jehusDiYPowerwalls/
If you would like support my Projects you can:
Buy a Tesla using my referral code https://ts.la/christal20797
donate: http://j35.us/helpwithcash
Donate BitCoin - 1PjhLF2vPueywwaoUMetZCLbC6rQiniyj7
or you can become our patron https://www.patreon.com/jehu

14 thoughts on “Soc cable – battgo to pcb connector”
  1. Avataaar/Circle Created with python_avatars Throttle Nerd says:

    Great, Jehu, but just in case — this cable doesn’t have anything to do with the BattGo, which transfers battery info through one wire (uses special kind of XT60 plug), it’s just a balance lead adaptor.

  2. Avataaar/Circle Created with python_avatars 1fastbuggy says:

    Is there any way to just but your 24 v 7s pack without the cells. I have 200 18650 cells here ?

  3. Avataaar/Circle Created with python_avatars OffGrid Aussie Prepper™ says:

    OI Jehu, what r u going to do when u cant buy shit from china anymore?? Do u have a plan? Have u considered buying excess stock b4 the trade embargo, things r heating up and u need to be prepared for it…. or u can kiss ur business goodbye, its bad ur gov is trying to make u poor and desperate while big corps take all the small business cashflow away.

  4. Avataaar/Circle Created with python_avatars Roland Geter says:

    Jag35…. you guys are Right on top of On… thanks for sharing your expansion indevers and I wish you guys Much success in this Crazy and more cured and peaceful 2021 year

  5. Avataaar/Circle Created with python_avatars Sam S says:

    Love the BattGo!

  6. Avataaar/Circle Created with python_avatars Progress NotPerfection says:

    How much to install electric engine for car

  7. Avataaar/Circle Created with python_avatars Randy Carter says:

    I always try to use polarized connectors. It's way to easy to put one of those connections in backwards. You can have custom cable assemblies made in China.

  8. Avataaar/Circle Created with python_avatars Will Cunningham says:

    Your timing is awsome. Moments before I found this video, I had just finished putting together my BMS kit and then ordered the BG-8S and was unsure as to how to connect the two. And now I did just buy the 8 pin cable you suggested. Thanks

  9. Avataaar/Circle Created with python_avatars Jesse van der Zouw says:

    You can also make a small adapter PCB. If you have a female IDC connector where the ribbon cable plugs in, then you can wire it on the PCB to a JST that has the same pinout as the BattGo. Then you can use a male to male cable to connect those. Those PCB's would cost like 50 cents and make a more reliable and less error-prone connection than manual soldering. I can design the PCB for free, its really simple. Message me if you need any help.

  10. Avataaar/Circle Created with python_avatars Elviz Prezilly says:

    Does s the $39 come with the battery module ? It looks like it is part of the dealp

  11. Avataaar/Circle Created with python_avatars jayzo says:

    It'd be fiddly, but you could use the female IDC box connector and spread the wires so that they skip a terminal and then use the JST style connector on the other end, that way you can't accidentally connect it the wrong way.

  12. Avataaar/Circle Created with python_avatars Christian Peri says:

    Maybe you can start selling the jag35 store in person as well, so someone could walk in and buy batteries, PCBs, etc.

  13. Avataaar/Circle Created with python_avatars BBRice says:

    Two restrooms for parallel pooping. 🤣

  14. Avataaar/Circle Created with python_avatars Halmand says:

    the cells are actually secured individually. because the balance cable makes a parallel connection and then too much current could flow between the cells via the balace cable, or am I wrong

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.