Build Parts list:
Batteries : https://bit.ly/3AsnMdS
PCB kit: https://jag35.com/products/hi-power-7s-battery-module-kit
Recommended Inverters https://kit.co/jehu/power-inverters
Reference How to videos for this project:
HP battery modules: https://youtu.be/lurcyvYLg6Q
BMS Modules: https://youtu.be/NDKOxYSxp6g
Its not Click Bait 200 cells x 3000mah = 600,000mAh AKA as 2.2kWh
Part 2 with Teslanomics https://youtu.be/4hez-AdnoWM
Where can learn more about batteries? http://j35.us/DIYlithiumBatteryBook
Join our Facebook Group https://www.facebook.com/groups/jehusDiYPowerwalls/
Batteries : https://bit.ly/3AsnMdS
PCB kit: https://jag35.com/products/hi-power-7s-battery-module-kit
Recommended Inverters https://kit.co/jehu/power-inverters
Reference How to videos for this project:
HP battery modules: https://youtu.be/lurcyvYLg6Q
BMS Modules: https://youtu.be/NDKOxYSxp6g
Its not Click Bait 200 cells x 3000mah = 600,000mAh AKA as 2.2kWh
Part 2 with Teslanomics https://youtu.be/4hez-AdnoWM
Where can learn more about batteries? http://j35.us/DIYlithiumBatteryBook
Join our Facebook Group https://www.facebook.com/groups/jehusDiYPowerwalls/
Looked fun, very fun.
Personally thou i would have gone with something like s168 or 32650. No need for pcb's & holders everywhere eating space. But good job, looks awesome.
Where are you getting the 600,000mah number from? None of your statement or numbers show this, is it just a bait title?
brilliant battery holder pcb design
save petty maintenance time if just replace a bad cell.
Thank you, now from Ukraine, some advices realy help)
I'd like to know how much you have into that? Seems like it would be a little pricey.
I did check out the kit, batteries and case. Looks like you have close to $1000 in the whole project. It's not too bad for what you get. Still a little pricey for a DIY pack.
Hello, how much of this home ro backup home?
Didn't see it in the video. What is the maximum input from solar?
I'd recommend covering the stand-offs with heatshrink insulation. That's a lot of current to have on naked bus bars floating around like that.
Could build one yourself and spend 14x the price it would cost you to buy say a Jackery unfortunately.
Hi! Could you explain why do you use two BMSs here?
Yes
I have two electric troller.motors. i am going to build a suitcase battery when I find the right amps needed so I can drive it with a battery for a few hours at half speed. That will put me on course to keep building electrics for my canal and a few lakes too. I built my own camper flat bottom boat. If this works then foiling is next!!
Hi
Your powerbank has voltaje regulator to inverter or voltage input is variable?
sorry for my bad english
ππππππ€ππ
Seems you have the contacts to take my idea and make it work. I'll have 25% of profits if you or any one reading this does do it.
Most people have power tools with batteries already.
Make a adaptor to join theses together.
Ie multiply 18v dewalt battery packs join into a power wall ect.
Save harvesting them to remake.
Must be about 10 manufacturers who make theses batteries already.
Linking them together while not in use or to just charge while in the pack.
Linked into matching make slots but away to save braking the original chargers they come with.
Hello sir, I need a help from you,
I have ev bike battery 60v 20ah , with 6am charger..
I want to made a power station to charge my ev bike 60v 20ah battery, two/ three time..
What type of battery and what type of inverter I need??
Please help, and explane me brief
Thank you