Executive Producer : Julian
PCB Boards - Coming soon (next week)
Cell Meter https://j35.us/cellLog8-v2
Power Meter https://j35.us/BiDirect-200A-Meter
https://j35.us/ThermalCamera
FAQ:
1) Where can learn more about batteries? http://j35.us/DIYlithiumBatteryBook
2) Where can I buy Lithium Batteries https://j35.us/Lithium-July
3) Where Can I buy Solar Panels? Flexible - http://j35.us/136wFlexSolarPanl
Glass - http://j35.us/100w-100-solar
DIY - http://j35.us/DIY-Solar-cells
4) Where can I buy a Battery Management System? http://j35.us/Batrium
5) What motor does your VW bus use? http://j35.us/HPEVS-AC51-Motor
6) What parts do you use on your Samba? https://j35.us/eSambaProj
7) What is the best fuse wire? I only use 1/8w resistor legs http://j35.us/ResistorLegs
8) Why not use Supercapacitors?
A. Batteries work better at this time, caps are rare and expensive devices that are very good at doing things not needed for storage systems typically.
Disclosure: When you click on links to various merchants on this Videos and make a purchase, this can result in the earning of a commission. Affiliate programs and affiliations include, eBay Partner Network, and Amazon..
My video gear - https://kit.com/jehu/vlogging-essentials
My T-shirts - https://kit.com/jehu/jehu-s-merchandizing
Follow me on Instagram http://j35.us/insta-jag35
Follow me on Twitter http://j35.us/twitter-jag35
Follow me on Facebook http://j35.us/Facebook-JehuGarcia
If you would like support my Projects
you can donate: http://j35.us/helpwithcash
Donate BitCoin - 1PjhLF2vPueywwaoUMetZCLbC6rQiniyj7
or you can become our patron https://www.patreon.com/jehu
sponsors
http://j35.us/jag35-2016
http://gabvwkey.com
http://j35.us/indiespot-2016
http://evwest.com
http://www.rode.com/products

14 thoughts on “18650 diy powerwall pcb module power load test”
  1. Avataaar/Circle Created with python_avatars Irene says:

    i've seen such video's before not clear what youir positn gh link was for your sellign cells lol like i sawyyu doing many molnths ago wtf

  2. Avataaar/Circle Created with python_avatars Ravi Riley says:

    "A powerwall is a battery that goes in your wall…but that's not why it's called a powerwall, it's called powerwall because it powers your wall" – Jehu Garcia 2018

  3. Avataaar/Circle Created with python_avatars 1fastbuggy says:

    Hello Jehu from Canada. You rock ! I am new to this and would like to build a power small power wall. My question is. I have some 18650 Samsung LG with average 2169 MAH . And some with 2600 MAH . Can I still use these together assembled into separate packs in parallel ?

  4. Avataaar/Circle Created with python_avatars crazy carl says:

    St jehu what a decent guy thanks for sharing your knowledge

  5. Avataaar/Circle Created with python_avatars LadyQ onIMVU says:

    Thanks for making all of this available

  6. Avataaar/Circle Created with python_avatars Pablo Rodriguez says:

    Awesome! I can't wait for these to become available.

  7. Avataaar/Circle Created with python_avatars SaSaa_86 says:

    opposite side for + and – is a very BAD!! idea… one module turned around Boom! stick with the layout that you have or switch it from the front two hole to the right or left side holes.

    even better would be to place the holes on one side closer together so they could not touch even when flipped around or place one pole off center for +

  8. Avataaar/Circle Created with python_avatars Eduardo Jimenez says:

    Que onda amigo una petición me gusta mucho tu canal me gustaría mucho que tuvieras un canal en español espero y te animes saludos desde México gdl

  9. Avataaar/Circle Created with python_avatars Jessie Jackson III says:

    wow, another great upgrade addition. Truly can't wait for your great idea becomes available and the turn out of your proven it works concept. Ok um, notion or idea on the 2nd version with the 14 cell. YOu think its possible to get a good clear spacing on the side that doesn't have traces to maybe utilize already tech cooling in the graphics card industry for circuit cooling. I know it will increase deminision but nether the less it opens up to auto thermal cooling

  10. Avataaar/Circle Created with python_avatars Shubham Patil says:

    Hey jehu which series of cells are best for 3c to 5c continius in capacity of 22000 2600 and 3000mah

  11. Avataaar/Circle Created with python_avatars gama harrison says:

    Please let me know when you get the boards I am interested and the cost thank you for shearing the info

  12. Avataaar/Circle Created with python_avatars G Grogan says:

    Can you explain the amps per cell calculation, when the Pack is built?

  13. Avataaar/Circle Created with python_avatars G Grogan says:

    Great video – interesting test

  14. Avataaar/Circle Created with python_avatars John - says:

    Great info, not only in this video but the whole channel gives me great insights. Do you know if the tesla Powerwall is already able to stay on if there is no power from the grid? i know that feature was still disabled. I know you are running a few stand-alone powerwalls but i'm mostly interested in a DIY power distributor/analyser that is integrated in my home and would still work if there is no power from the grid but does not start feeding the grid(they said that was one of the issues with the tesla one).
    Any suggestions for a DIY solution sort of like the Solaredge StorEdge ?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.